YOU ARE HERE:HOME>steel cut wire shot>steel cut wire shot for shot blasting

steel cut wire shot for shot blasting
2017-04-19 09:16:11   From:   Click:

BlastingNuoqi steel shotShot Blasting Limited carry out pre-treatment of metallic surfaces such as gates, railings,
\
Blasting
Nuoqi steel shot Shot Blasting Limited carry out pre-treatment of metallic surfaces such as gates, railings, motor components, bicycle frames, motorcycle frames, metal furniture and any other metallic surfaces the list is not exhaustive.
 
Pre-treatment of metallic surfaces is done meticulously as it is the first step to powder coating.
 
It is essential to have your substrate blasted prepared correctly before the powder coat is applied.
 
Shot Blasting Motorcycle
Shot Blasted Motorcycle
Shot Blasting
Without perfect pre-treatment or shot blasting, powder coating never stays for sufficient time and the entire expenses is wasted. As we are specialized powder coaters in Poole, Bournemouth, Dorset we are very particular about this pre-treatment process.
 
Proper shot blasting would ensure removal of rust, previous paint coatings, and mill scale to make the metal surface completely bare. Powder coating on any surface other than bare metal is never durable. By technical standards, metallic surface ratings have been fixed at SA 3 and SA 2.5 to be judged fit for powder coating.
 
Ways of Shot Blasting
Shot blasting essentially involves firing of minute particles under total control. This helps erode or etch away surface contamination that exists in the form of solids. Our expertise lies in the use of proper abrasives in terms of size, shape and metallic nature of a particular item. Shot blasting could be carried out in large dedicated rooms or even in specially built cabinets. Our blast room measures about 10 feet x 8 feet.Both manually operated and automated shot blasters are used for pre- treatment of metallic items
 
Blast Cabinet
This is a closed loop arrangement wherein an abrasive could be recycled after being used. Blast cabinet is an assembly of four separate functions, a cabinet, blasting system, abrasive particle recycling process and waste particle collection. The cabinet uses both dry and wet processes of blasting the dry process based on suction and the wet system based on injecting liquid abrasives. Wet process of blasting is used when there is possibility of damage to a metallic surface from the heat generated from friction in dry procedure.
 
Blast Room
The blast room could be considered a giant adaptation of a blast cabinet. A blast room contains all but the recycling facility of a blast cabinet. Recycling for a room is done manually with shovels and sweeps.
 
Abrasive Components Used in Blasting
Abrasives are a vital ingredient of shot blasting. Silica in form of sand is the commonest of the abrasives used in blasting. However silica being prone to conversion to dust results in health hazards for blast room operators. Commercial varieties of silica used for blasting is often coated with resins to control dust emission. Garnet is a more expensive though safer abrasive as it produces dust in limited quantities.
 
Steel shot, Aluminium Oxide, Sand, Walnut Shells and Glass Bead are also used as abrasives in blasting.
 
At Nuoqi steel shot Shot Blasting Limited we offer shot blasting as a pre-treatment service for powder coating. We put special emphasis on this pre-treatment process as it is the underlining factor for a perfect powder-coating job. As in all our services offered we never compromise in this service too. We are among the leading shot-blasting service providers in Poole and Bournemouth Dorset.

Related search:steel cut wire shot

The Last:cut wire shot 0.5mm
The Next:GRANALLA DE ACERO ESFÉRICA Este abrasivo